UAP 158 - The Challenge Mac OS

UAP 158 - The Challenge Mac OS

Uap 158 - The Challenge Mac Os Download
Cached
Linux, Mac OS X, or Microsoft Windows 7/8/10 Java Runtime Environment 1.6 (1.8 or newer recommended) Web Browser: Google Chrome (Other browsers may have limited functionality.). UniFi Cloud Key or Dream Machine, or machine running Linux, Mac OS X, or Windows 7/8/10. Find UniFi AC Pro (UAP-AC-PRO) and other network devices on our website. Low prices, wide selection and fast shipping  ☎ +32.
Mounting Bracket
Flat Head Screws (Qty. 3)
Screws (Qty. 3)
PoE Adapter (24V, 0.5A) with Mounting Bracket
Installation RequirementsCAT5/6 cable
Phillips screwdriver
Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
System RequirementsUap 158 - The Challenge Mac Os DownloadLinux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.6 (1.8 or newer recommended)
Web Browser: Mozilla Firefox, Google Chrome, Microsoft Edge, or Microsoft Internet Explorer 11
UniFi Controller software v5.x or newer, available at: ui.com/download/unifi

LEDPortsCachedEthernet
The 10/100 Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by any of the following:
Included PoE Adapter
Ubiquiti UniFi Switch with PoE
Ubiquiti TOUGHSwitch™ PRO
Reset
The Reset button serves two functions for the UniFi AP:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than five seconds until the LED turns off.
Locking Clip
During installation, the Locking Clip on the Mounting Bracket locks into the Locking Notch on the UniFi AP to help prevent theft.
Mounting Bracket
This bracket is used for wall or ceiling mounting.
Wall MountOptional
Note: If the Ethernet cable feeds along the mounting surface, then remove the Cable Feed Plug on the side of the UniFi AP instead.
Ceiling MountNote: The UAP/UAP-LR uses 24V passive PoE. PoE must be manually enabled on the switch. 
OR
UAP/UAP-LR
Dimensions
200 x 200 x 36.5 mm
(7.87 x 7.87 x 1.44')
Weight
290 g (10.23 oz)
with Mounting Kit430 g (15.17 oz)
Networking Interface
(1) 10/100 Ethernet Ports
Buttons
Reset
Power Method
Passive Power over Ethernet (12-24V)
Power Supply
24V, 0.5A PoE Adapter (Included)
Power Save
Supported
Operating Frequency 
UAP2.4 GHz
UAP-LR2.4 GHz
Max. Power Consumption
UAP4W
UAP-LR6W
Max. TX Power
UAP20 dBm
UAP-LR27 dBm
Antenna
Integrated Omni
Antenna Gain
4 dBi
Wi-Fi Standards
802.11 b/g/n (2.4 GHz)
Wireless Security
WEP, WPA-PSK,
WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID
Up to Four per Radio
Mounting
Ceiling/Wall (Kits Included)
Operating Temperature
-10 to 70° C (14 to 158° F)
Operating Humidity
5 - 80% Noncondensing
Certifications
CE, FCC, IC
Mounting Template
Power Cord*
* Included only in the single-pack of the UAP-AC-EDU.
Phillips screwdriver
Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed)
Cat5/6 UTP cable for indoor installations
System RequirementsLinux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.8 or above recommended
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v5.4 or newer (available at: ui.com/download/unifi)
LEDUniFi AP PortsSecondary
Reserved for future use.
Reset
The Reset button serves two functions for the UniFi AP:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. Note: You must remove the UniFi AP from the Speaker Assembly before you can access the Reset button.
Cable Feed Opening
The USB and Ethernet cables feed through this opening.
USB
The USB 2.0 port is used to support the Speaker Assembly.
Main
This Gigabit Ethernet port is used to carry power and data.
Back of the Speaker AssemblyMain Port
This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server.
Clamp Bracket
The four Clamp Brackets are used to secure the UniFi AP AC EDU to the ceiling tile.
We strongly recommend that you attach the Safety Wire (length: 430 mm) to a secure structural point using its clasp (inside diameter: 14 mm). Do NOT attach the Safety Wire to a T-bar in the ceiling grid. 
Note: It is the installer's responsibility to verify that installation complies with local construction and safety codes.
Two examples are shown below.
OR

Ethernet
The 10/100 Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by any of the following: Included PoE Adapter Ubiquiti UniFi Switch with PoE Ubiquiti TOUGHSwitch™ PRO
Reset
The Reset button serves two functions for the UniFi AP: Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds until the LED turns off.
Locking Clip
During installation, the Locking Clip on the Mounting Bracket locks into the Locking Notch on the UniFi AP to help prevent theft.
Mounting Bracket
This bracket is used for wall or ceiling mounting.

UAP/UAP-LR
Dimensions	200 x 200 x 36.5 mm (7.87 x 7.87 x 1.44')
Weight	290 g (10.23 oz)
with Mounting Kit	430 g (15.17 oz)
Networking Interface	(1) 10/100 Ethernet Ports
Buttons	Reset
Power Method	Passive Power over Ethernet (12-24V)
Power Supply	24V, 0.5A PoE Adapter (Included)
Power Save	Supported
Operating Frequency
UAP	2.4 GHz
UAP-LR	2.4 GHz
Max. Power Consumption
UAP	4W
UAP-LR	6W
Max. TX Power
UAP	20 dBm
UAP-LR	27 dBm
Antenna	Integrated Omni
Antenna Gain	4 dBi
Wi-Fi Standards	802.11 b/g/n (2.4 GHz)
Wireless Security	WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID	Up to Four per Radio
Mounting	Ceiling/Wall (Kits Included)
Operating Temperature	-10 to 70° C (14 to 158° F)
Operating Humidity	5 - 80% Noncondensing
Certifications	CE, FCC, IC

Main Port
This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server.
Clamp Bracket
The four Clamp Brackets are used to secure the UniFi AP AC EDU to the ceiling tile.

LEDPortsCachedEthernet
The 10/100 Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by any of the following:
Included PoE Adapter
Ubiquiti UniFi Switch with PoE
Ubiquiti TOUGHSwitch™ PRO
Reset
The Reset button serves two functions for the UniFi AP:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than five seconds until the LED turns off.
Locking Clip
During installation, the Locking Clip on the Mounting Bracket locks into the Locking Notch on the UniFi AP to help prevent theft.
Mounting Bracket
This bracket is used for wall or ceiling mounting.
Wall MountOptional
Note: If the Ethernet cable feeds along the mounting surface, then remove the Cable Feed Plug on the side of the UniFi AP instead.
Ceiling MountNote: The UAP/UAP-LR uses 24V passive PoE. PoE must be manually enabled on the switch. 
OR
UAP/UAP-LR
Dimensions
200 x 200 x 36.5 mm
(7.87 x 7.87 x 1.44')
Weight
290 g (10.23 oz)
with Mounting Kit430 g (15.17 oz)
Networking Interface
(1) 10/100 Ethernet Ports
Buttons
Reset
Power Method
Passive Power over Ethernet (12-24V)
Power Supply
24V, 0.5A PoE Adapter (Included)
Power Save
Supported
Operating Frequency 
UAP2.4 GHz
UAP-LR2.4 GHz
Max. Power Consumption
UAP4W
UAP-LR6W
Max. TX Power
UAP20 dBm
UAP-LR27 dBm
Antenna
Integrated Omni
Antenna Gain
4 dBi
Wi-Fi Standards
802.11 b/g/n (2.4 GHz)
Wireless Security
WEP, WPA-PSK,
WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID
Up to Four per Radio
Mounting
Ceiling/Wall (Kits Included)
Operating Temperature
-10 to 70° C (14 to 158° F)
Operating Humidity
5 - 80% Noncondensing
Certifications
CE, FCC, IC
Mounting Template
Power Cord*
* Included only in the single-pack of the UAP-AC-EDU.
Phillips screwdriver
Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed)
Cat5/6 UTP cable for indoor installations
System RequirementsLinux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.8 or above recommended
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v5.4 or newer (available at: ui.com/download/unifi)
LEDUniFi AP PortsSecondary
Reserved for future use.
Reset
The Reset button serves two functions for the UniFi AP:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. Note: You must remove the UniFi AP from the Speaker Assembly before you can access the Reset button.
Cable Feed Opening
The USB and Ethernet cables feed through this opening.
USB
The USB 2.0 port is used to support the Speaker Assembly.
Main
This Gigabit Ethernet port is used to carry power and data.
Back of the Speaker AssemblyMain Port
This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server.
Clamp Bracket
The four Clamp Brackets are used to secure the UniFi AP AC EDU to the ceiling tile.
We strongly recommend that you attach the Safety Wire (length: 430 mm) to a secure structural point using its clasp (inside diameter: 14 mm). Do NOT attach the Safety Wire to a T-bar in the ceiling grid. 
Note: It is the installer's responsibility to verify that installation complies with local construction and safety codes.
Two examples are shown below.
OR
Note: The Gigabit PoE adapter is included only in the single-pack of the UAP-AC-EDU.
Sfd mac os. Optional
Ubiquiti Networks offers the UniFi EDU app so you can broadcast announcements with clarity from your mobile device.
Follow the on-screen instructions.
The UniFi EDU app includes five tabs:
Broadcast Create broadcast groups and make an immediate announcement.
Schedule Schedule announcements.
Recordings Create recordings for later use.
Volume Adjust the volume for each UniFi AP AC EDU.
Settings Switch to a different site.
Note: For details, refer to the User Guide, which is available at: ui.com/download/unifi
UAP-AC-EDU
Dimensions
287.5 x 287.5 x 125.9 mm
(11.32 x 11.32 x 4.96')
Weight 
1.820 kg (4.012 lb)
Networking Interface
(2) 10/100/1000 Ethernet Ports
Port
(1) USB Port
Buttons
Reset
Power Method
802.3at PoE+
Power Supply
48V, 0.5A PoE Gigabit Adapter1
Supported Voltage Range
44VDC to 57VDC
Max. Power Consumption
Collective: the community created card game mac os. 20W
Operating Frequency
2.4 GHz
5 GHz
Max. TX Power
2.4 GHz22 dBm
5 GHz22 dBm
The adventure of jack (updated) mac os. MIMO
2.4 GHz3 x 3
5 GHz3 x 3
Throughput Speeds2
2.4 GHz450 Mbps
5 GHz1300 Mbps
Range2
122 m (400 ft)
Antennas
(3) Dual-Band Internal 
Antenna Gain
2.4 GHz: 3 dBi, 5 GHz: 3 dBi
Wi-Fi Standards
802.11 a/b/g/n/ac
Wireless Security
WEP, WPA-PSK, WPA Enterprise (WPA/WPA2, TKIP/AES)
BSSID
Up to Four per Radio
Mounting
Wall/Ceiling (Kits Included)
Operating Temperature
-10 to 70° C (14 to 158° F)
Operating Humidity
5 - 95% Noncondensing
Certifications
CE, FCC, IC
1Only the single-pack of the UAP-AC-EDU includes a PoE adapter. 
2Speed and Range values may vary and are based on optimal environments.

Max. TX Power
UAP-AC-EDU
Dimensions	287.5 x 287.5 x 125.9 mm (11.32 x 11.32 x 4.96')
Weight	1.820 kg (4.012 lb)
Networking Interface	(2) 10/100/1000 Ethernet Ports
Port	(1) USB Port
Buttons	Reset
Power Method	802.3at PoE+
Power Supply	48V, 0.5A PoE Gigabit Adapter1
Supported Voltage Range	44VDC to 57VDC
Max. Power Consumption	Collective: the community created card game mac os. 20W
Operating Frequency	2.4 GHz 5 GHz
2.4 GHz	22 dBm
5 GHz	22 dBm
The adventure of jack (updated) mac os. MIMO
2.4 GHz	3 x 3
5 GHz	3 x 3
Throughput Speeds2
2.4 GHz	450 Mbps
5 GHz	1300 Mbps
Range2	122 m (400 ft)
Antennas	(3) Dual-Band Internal
Antenna Gain	2.4 GHz: 3 dBi, 5 GHz: 3 dBi
Wi-Fi Standards	802.11 a/b/g/n/ac
Wireless Security	WEP, WPA-PSK, WPA Enterprise (WPA/WPA2, TKIP/AES)
BSSID	Up to Four per Radio
Mounting	Wall/Ceiling (Kits Included)
Operating Temperature	-10 to 70° C (14 to 158° F)
Operating Humidity	5 - 95% Noncondensing
Certifications	CE, FCC, IC